Home > Error Codes > Baja Spa Error Codes

Baja Spa Error Codes

Contents

Published on Apr 1, 2014This tutorial video focuses on what to do if your Arctic spa is getting a FLO or FLC error code on your control panel. The temp sensor is the larger of the two silver bullets. Jimmy Bagley, IA Wonderful service, prompt, efficient, and accurate. Arrange for an electrician to come out and correct issues relating to power problems. http://onlinetvsoftware.net/error-codes/beep-codes-and-error-codes.php

Spa has shut down. At the same time this test is being done, put your hand on the stainless steel heater manifold, it should NOT be hot, it should only be at the same temperature Then power the system back up, if the error code goes away, the problem was either a dirty filter (clean or replace) or too many jets were closed off. Hi limit sensor is disconnected or shorted or the spa temperature is above 112° F.

Sundance Spa Error Codes

Balboa (used by Belize Spas and many other hot tubs) pd = Power supply, unit running on battery backup OH = Sensors reading 112-118° F. I was unable to get the red wire off of the connector so I unplugged the black lead and used my OHMeter on the leads off of the flow switch. System will restart when temp.

Note: The control system brand name is usually different from the hot tub brand name. HeatnSweep 12,289 views 3:28 Arctic Spa Topside Functions.mov - Duration: 4:29. Not sure if this is relevant to the situation but an observation none the les.JACUSTOMER-vzeh1f4e- : The reason why I did try to adjust the pressure switch myself was from this Baja Hot Tub Manual The most common valve; the tee handle valve, will show that the handle is up, but in many cases the gate is still half closed, make sure that it is open

Your cache administrator is webmaster. Arctic Spa Error Codes PSoC = Pressure switch open with circulating pump. Turn off power at the breaker, wait a few moments and then turn the power back on to reset the spa. When that happens, it's anybody's guess where it went and where it stopped.

They truly know what they are talking about, and they actually care about you. Hot Tub Error Codes The system returned: (22) Invalid argument The remote host or network may be down. Categories Consumer Research for Best Hot Tub (99) hottubworks.com (126) life (130) spa chemicals (67) spa covers (159) Spa Crystals (11) spa filter (31) spa heater (25) Spa Ozone (17) Spa Do not use spa when temperature is flashing or the OH message is displayed.

  1. See picture below for reference FINAL NOTE: Balboa M7 systems have the Temperature Sensor as well as the Hi Limit sensor installed in the heater assembly, one at each end.
  2. SN, Sn1, Sn2 Sn3, HL, E1, E3, Prh, HtS, Blinking Lights Hi Limit Sensor Failure.
  3. Pump may also be deactivated).
  4. Now when I turn on the power from the breaker box, the low jets come on and that's it.
  5. If it just goes to FL indicating a flow switch open, then the board is okay and it's sounding like the pressure switch may just be stuck in the closed position,
  6. Up next Pressure Switch Flow Code No Heat Spa Hot Tub How To The Spa Guy - Duration: 8:14.
  7. If it is hot you have a flow issue, or if it stays hot after the pump is shut off either the pressure switch has stuck close (see FLO error codes
  8. th2/current temperature = On startup indicates temperature probe problem.
  9. I'll try to explain this the best that I can although I could also send a picture if it would be easier.
  10. System will restart when temp.

Arctic Spa Error Codes

Now if you can find ANY pool or spa company open, they should have one. FLO2 = Closed or shorted flow switch on system startup Pinnacle OH = Temperature has exceeded 110° F SN = Sensor failure FL = Flow/pressure switch stuck in closed position Spa Sundance Spa Error Codes About eHow Advertise Contact Us Write For eHow Terms of Use Privacy Policy Report Copyright Ad Choices en-US How to by Topic Mobile Privacy Connect with us ERROR The requested URL Arctic Spa Error Codes Hl http://www.spadepot.com/spa-error-codes.htm SpaCyclopedia Contact CHECK OUT 0 Your cart is empty.Continue shopping to add items to your cart.

Arctic Spas Utah 2,945 views 1:53 Pressure switch - Duration: 1:25. http://onlinetvsoftware.net/error-codes/bd2-error-codes.php out of box M Get Weekly DIY Guides & Inspiration Life Made Easier. ArcticHotTubs 23,311 views 1:25 Hot Tub Filter Review | Arctic Spas - Duration: 1:49. Freshfield, Liverpool, UK This expert is wonderful. Lazy Spa Error Codes

How to Fix Hot Tub HFL Errors If your hot tub display panel displays an error code, don't necessarily think you should call the service center. One sensor has detected 110°F. For the complete list of error codes click here. http://onlinetvsoftware.net/error-codes/bgp-error-codes.php Sign in Share More Report Need to report the video?

Also, I don't know if this is related at all but it was something I noticed while I was cleaning the filter today. How To Fix Flo Error Hot Tub Flow problems are the number one source of trouble for the spa or hot tub owner. Flo = Improper flow or pressure switch malfunction Cool = Water temp 20° below set point ICE = Potential freeze condition has been detected Sn1 = Hi-limit sensor malfunction Sn3 =

Loading...

PSoH = Pressure switch open with high pump. Wondering what your spa is trying to tell you? Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know. Balboa Hot Tub Error Codes FL1 = Water flow problem, inhibited or pressure switch malfunction.

Generated Sat, 01 Oct 2016 23:37:13 GMT by s_hv1002 (squid/3.5.20) ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://0.0.0.9/ Connection Many times, this will fix the issue. No problem, now if the switch is indeed stuck in the closed position, what will happen is the spa will heat up to the temperature you have it set for, and http://onlinetvsoftware.net/error-codes/bd2-sql-error-codes.php No action is necessary.

Sign in to report inappropriate content. Transcript The interactive transcript could not be loaded. JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance. I wanted to thank you for your time explaining what I needed, as I wasn't 100% sure if what I was ordering was correct.

I 9/21/2016 9/25/2016 Mike R. You can also check the pressure switch or flow switch with a an Ohm meter. HotTubsByArcticSpas 8,258 views 6:44 Balboa Legacy Systems Series - Pressure Switch Calibration - For non M7(TM) systems - Duration: 4:17. If you are unsure of something or have any questions, please do not hesitate to contact us via Email.

OH = Over heat. dr = Inadequate water detected in heater. At any rate, here's my issue. Loading...

Check the spa to ensure that it is drawing power from the breaker box. Low speed pump and heater will activate until spa reaches 65°F.